❏ During the JET COOL function at any moment, the A/C starts to blow the cool air at
extremely high speed for 30 minutes setting the room temp. automatically to 18°C. It is
especially used to cool the room temp. in the shortest time in a hot summer.
In heat pump mode the JE
T COOL function is not available.
❏ In order to return to the normal cooling mode from the JET COOL mode, you just press
either the operation mode selection button, airflow volume selection or temp. setting button
or the JE
T COOL button again.
Press the Start/Stop button.
The unit will respond with a beep.
Press the Jet Cool button to operate the
speed cooling mode and the unit will
operate in super high fan speed on cooling
mode for 30 minutes.
To
cancel the Jet Cool mode, press the Jet Cool button
again
or the fan speed button or the room temperature
setting
button and the unit will operate in high fan speed on
cooling mode.
Jet Cool Operation
1
2
3
Energy-saving cooling mode can save energy in cooling and healthy dehumidification operation, because it
can operate efficiently by setting body-adaptation time according to the change of time and temperature and
adjusting automatically desired temperature.
1. Press the START/STOP BUTTON to start the unit.
2. Open the door on the remote controller.
Selec
t cooling operation or healthy dehumidification operation.
3. Press the ENERGY-SAVING COOLING MODE BUTTON.
4. To cancel the energy-saving cooling mode, press the ENERGY-SAVING
COOLIN
G MODEL BUTTON again and unit will operate in previous
mode(Coolin
g or healty dehumidification mode).
EneEnerrgy-Sgy-Saavinvingg CoolinCoolingg ModModee (Optional)(Optional)
Owner's Manual 13
To Next Page
Loading...
