4
Manually connecting the soundbar to the wireless subwoofer ([ See
“Connecting the wireless subwoofer manually” on page 8.)
If you see a red LED on the wireless subwoofer, it means that the soundbar is not connected to the
subwoofer. If this is the case, connect them in the following order.
A Press the Power
button on the soundbar to turn it off.
B Press the PAIRING button on the back of the wireless subwoofer. Check if each LED blinks
green.
- If you still see a red LED on the wireless subwoofer, press and hold the button on the back of
the subwoofer again.
C Press the Power
button on the soundbar to turn it on.
D When the connection is established, you will see a green LED light on the wireless subwoofer
light up.
To Next Page
Loading...
