LG S65Q User Manual

7
Checking the connection with the LED on the front of the wireless
subwoofer
You can check the connection status by looking at the LED on the front of the wireless subwoofer.
LED Color Status
Blinking green Connecting in progress
Green Connected successfully
Red Bad connection, or the subwoofer is in standby
Off Power cable not connected

LG S65Q Specifications

General

Sustainability compliance	Yes
Sustainability certificates	ENERGY STAR
Display type	LCD
Product color	Black
Apple AirPlay 2 support	No
Audio formats supported	AAC, LPCM
Consumer Electronics Control (CEC)	SimpLink
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 (HDR10)
Audio decoders	Dolby Digital, DTS Digital Surround
Equalizer modes	Bass Blast+, Bass Blast, Movie
RMS rated power	420 W
Audio output channels	3.1 channels
Center speaker RMS power	40 W
Front speakers RMS power	90 W
Audio sample rate (24bit)	96 kHz
Front speaker sensitivity	83 dB
Center speaker sensitivity	82 dB
HDMI in	1
Bluetooth codec	SBC / AAC
Bluetooth version	4.2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Number of products included	1 pc(s)
Subwoofer type	Active subwoofer
Subwoofer sensitivity	85 dB
Subwoofer connectivity	Wireless
Woofer diameter (subwoofer)	6 \
Package type	Box
Package depth	247 mm
Package width	1071 mm
Package height	465 mm
Package weight	12400 g
Soundbar power consumption	38 W
Power consumption (standby)	0.5 W
Power consumption (typical)	71 W
Subwoofer power consumption	33 W
Impedance	4 Ω
Soundbar speaker RMS power	130 W

Weight and Dimensions

Depth	105 mm
Width	1000 mm
Height	63 mm
Soundbar weight	2880 g
Subwoofer depth	261 mm
Subwoofer height	171 mm
Subwoofer weight	5300 g