LG S65Q User Manual

8
Connecting the wireless subwoofer manually
If you see a red LED on the front of the wireless subwoofer, it means that the sound bar is not connected to the
subwoofer. If this is the case, connect them in the following order.
a Press the Power
button on the sound bar to turn it off.
b Press the PAIRING button on the back of the wireless subwoofer. Check if the LED on the front of the
subwoofer is blinking green. If you still see a red LED on the wireless subwoofer, press and hold the button on
the back of the subwoofer again.
c Press the Power button on the sound bar to turn it on.
d When the connection is established, you will see the LED light on the front of the wireless subwoofer light up
in green.
Note
• Install the sound bar as close to the wireless subwoofer as possible. The closer the distance between the sound
bar and the wireless subwoofer, the better the sound quality.
• Please ensure there are no obstacles between the sound bar and the wireless subwoofer.
• To prevent wireless interference, maintain a distance of at least 1 m (3.3 ft) between the sound bar or the
wireless subwoofer and any peripheral devices that generate strong electromagnetic waves (ex. wireless
routers, microwave ovens, etc.).

LG S65Q Specifications

General

Sustainability compliance	Yes
Sustainability certificates	ENERGY STAR
Display type	LCD
Product color	Black
Apple AirPlay 2 support	No
Audio formats supported	AAC, LPCM
Consumer Electronics Control (CEC)	SimpLink
High Dynamic Range (HDR) technology	Dolby Vision, High Dynamic Range 10 (HDR10)
Audio decoders	Dolby Digital, DTS Digital Surround
Equalizer modes	Bass Blast+, Bass Blast, Movie
RMS rated power	420 W
Audio output channels	3.1 channels
Center speaker RMS power	40 W
Front speakers RMS power	90 W
Audio sample rate (24bit)	96 kHz
Front speaker sensitivity	83 dB
Center speaker sensitivity	82 dB
HDMI in	1
Bluetooth codec	SBC / AAC
Bluetooth version	4.2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Number of products included	1 pc(s)
Subwoofer type	Active subwoofer
Subwoofer sensitivity	85 dB
Subwoofer connectivity	Wireless
Woofer diameter (subwoofer)	6 \
Package type	Box
Package depth	247 mm
Package width	1071 mm
Package height	465 mm
Package weight	12400 g
Soundbar power consumption	38 W
Power consumption (standby)	0.5 W
Power consumption (typical)	71 W
Subwoofer power consumption	33 W
Impedance	4 Ω
Soundbar speaker RMS power	130 W

Weight and Dimensions

Depth	105 mm
Width	1000 mm
Height	63 mm
Soundbar weight	2880 g
Subwoofer depth	261 mm
Subwoofer height	171 mm
Subwoofer weight	5300 g