58
e Tighten screws for fixing the wall mount to the holes. At this time, tighten the screws to a torque 12
kgf/cm
1.
Note
• When you mount the unit on the wall, fix it carefully so as not to drop.
• Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the
product and cause it to fall.
• Professional installers should read this manual carefully to ensure proper installation.
• Professional installers should forward this manual to customers after installation and encourage them
to read and store it in a convenient place for future reference.
• After reading the installation manual, keep it in a convenient place for future reference.
• Ask a professional installer appointed by the store for installation of the product. Installation by
someone other than a professional installer is extremely dangerous and may result in personal injury.
• Do not install the product in an unstable site that cannot withstand its weight. If the installation site
lacks sufficient rigidity, the product may fall and cause personal injury.
• Contact a professional installer appointed by the store prior to moving or replacing the product after
installation. Installation is a technical task and safety issues may arise if an individual attempts to
install or move the product personally.
• Do not hang on the product or subject it to severe impact after installation. Doing so may cause the
product to fall and cause personal injury.
To Next Page
Loading...
