To Next Page
B
Brenda HenrySep 4, 2025
What to do if the DVD/CD Receiver audio CD indicator does not work on my LG Receiver?
- SStephen NguyenSep 4, 2025
If the DVD/CD Receiver audio CD indicator on your LG Receiver isn't working, make sure a disc is inserted.
What to do if the DVD/CD Receiver audio CD indicator does not work on my LG Receiver?
If the DVD/CD Receiver audio CD indicator on your LG Receiver isn't working, make sure a disc is inserted.
Why is there no sound from my LG Receiver?
If your LG Receiver has no sound or very low sound, make sure the equipment connected with the audio cable is set to receive the DVD audio signal output. Check that the audio cables are securely connected and that the connected equipment is powered on. If the issue persists, try replacing the audio connecting cable, as it may be damaged.
How to fix LG SH32SD-SZ remote control that is not working?
If the remote control for your LG Receiver isn't working, make sure you're pointing it directly at the receiver's remote sensor. Ensure you are within 23 ft (7 m) of the receiver and that there are no obstacles in the way. If it still doesn't work, replace the batteries with new ones.
Why is there no sound coming from my LG Receiver?
If you experience no sound or very low sound from your LG Receiver, consider the following: * Verify that the equipment connected with the audio cable is set to receive DVD audio signal output. Select the correct input mode on the receiver. * Ensure the audio cables are securely connected to the jacks. * Check that the equipment connected with the audio cable is turned on. * If the audio connecting cable is damaged, replace it with a new one.
Why is there a loud hum or noise coming from my LG Receiver?
If you hear a loud hum or noise from your LG Receiver, check these: * Clean the disc. * Ensure the speakers and components are securely connected. * Move your TV away from the audio components if the DVD/CD Receiver is located too close to the TV.
Why is there no sound on my LG SH32SD-SZ Receiver?
If you experience no sound or very low sound from your LG DVD/CD Receiver, consider these solutions: * Ensure the equipment connected with the audio cable is set to receive DVD audio by selecting the correct input mode. * Check that the audio cables are securely connected to the jacks. * Verify that the equipment connected with the audio cable is turned on. * If the audio connecting cable is damaged, replace it.
Why can't I tune in radio stations on my LG SH32SD-SZ Receiver?
If you're unable to tune into radio stations on your LG Receiver, ensure the antenna is securely connected. If using automatic tuning, the signal strength may be too weak, so try tuning in the station manually. If tuning by scanning preset stations, preset the stations.
How to brighten the front panel display on my LG Receiver?
If the front panel display on your LG Receiver is too dim, press the DIMMER button on the remote control.
What to do if the playback picture is poor on my LG SH32SD-SZ Receiver?
If the playback picture on your LG Receiver is poor, start by cleaning the disc. Ensure a playable disc is inserted correctly (label side up) and placed within the guide on the disc tray. If a menu is on the screen, press the SETUP button to turn it off. Also, check if the Rating level is set and, if so, cancel the Rating function or change the rating level.
Why can't my LG SH32SD-SZ Receiver tune into radio stations?
If your LG Receiver is not tuning into radio stations, make sure the antenna is securely connected and properly positioned. If the signal strength is weak, try tuning in the station manually. If no stations are preset, you may need to preset them.
Covers general safety warnings, symbol explanations, and environmental considerations.
Guidelines for safe handling and use of the power cord to prevent hazards.
Cautionary notice regarding the use of the Class 1 laser product.
Instructions for handling the unit, especially when shipping.
Description of buttons, display window, and indicators on the front panel.
Details on various input and output terminals located on the rear panel.
Detailed explanation of buttons and their functions for operating the unit.
Connect the DVD/CD Receiver to your TV for video output.
Connect speaker cords to the appropriate terminals for surround sound.
Configure speaker size, volume, distance, and test signals.
Set rating limits, password, and unlock features for DVDs.
Instructions for playing DivX movie files and subtitle format.
Guide to diagnosing and resolving common problems and their causes.
General
