LG SH7Q Simple Manual

ENGLISH
Installing and Using the Product
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download
Owner’s Manual. Some of the content in this manual may differ from your product.
A Sound bar
B Status Display / Remote Control Receiver
C Wireless Subwoofer - Install it close to the sound bar.
a Connect the sound bar to your TV via an optical cable or an HDMI cable.
b Connect to power in the following order: wireless subwoofer [ sound bar. Then, turn on the sound bar. When the connection is
automatically established with the sound bar, the LED on the wireless subwoofer will light up green.
c Using the product with your TV
A Press the Function
button repeatedly until “OPT/HDMI ARC” appears on the status display.
B On your TV’s settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
C When the TV is properly connected to the product, “OPT” or “ARC” will appear on the status display with a sound.
d Connecting the product to your smartphone via Bluetooth
A Tap the Settings
button on your smartphone and select Bluetooth. Turn on the Bluetooth function. ( Off >
On)
B Press the Bluetooth pair
button. After a moment, you will see “BT READY” on the status display.
C Find and tap the product on your smartphone. The product appears as “LG SH7Q (XX)”.
D When the product is connected to your smartphone via Bluetooth, you can see the status display change from “PAIRED” [
“Connected Bluetooth device name” [ “BT”.
e Connecting to the LG Sound Bar app
A Find and install the LG Sound Bar app on Google Play or App Store from your smartphone.
B You can get more information regarding its use by selecting [Help] in [Setting].
If you see a red LED on the front of the wireless subwoofer, it means that the sound bar is not connected to the subwoofer. If this is the
case, connect them in the following order.
A Press the Power
button on the sound bar to turn it off.
B Press the PAIRING button on the back of the disconnected wireless subwoofer. Check if LED blinks green.
- If you still see a red LED on the front of the wireless subwoofer, press and hold the button on the back of the subwoofer again.
C Press the Power
button on the sound bar to turn it on.
D When the connection is established, you will see a green LED light on the front of the wireless subwoofer.
Keep the sound bar, the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.
y Some speakers may not make sound depend on the input source. Select CINEMA sound mode to listen through all speakers.
y Design and specications are subject to change without notice.
y Google Play is a trademark of Google LLC.
C
a
OPTICAL
OUT
HDMI IN
(ARC)
HDMI IN
a
B
A
Replacement of Battery
SH7Q.DINDLLK (Sheet)_SIMPLE_MFL71894818.indd 3-4 2023-02-08   10:33:26

LG SH7Q Specifications

General

Package depth	251 mm
Package width	1326 mm
Package height	482 mm
Package weight	21000 g
Audio decoders	DTS Digital Surround, DTS Virtual:X, Dolby Digital
RMS rated power	800 W
Audio output channels	5.1 channels
Front speakers RMS power	240 W
Front speaker sensitivity	82 dB
Audio Return Channel (ARC)	Yes
Impedance	4 Ω
Soundbar speaker RMS power	- W
Woofer diameter (imperial)	3 \
Subwoofer sensitivity	85 dB
Subwoofer connectivity	Wireless
Woofer diameter (subwoofer)	6 \
Display type	LCD
Product color	Black
Wall mountable	-
Consumer Electronics Control (CEC)	SimpLink
Bluetooth version	4.2
Connectivity technology	Wired & Wireless
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Soundbar power consumption	95 W
Power consumption (standby)	0.5 W
Subwoofer power consumption	33 W

Weight and Dimensions

Depth	97 mm
Width	1200 mm
Height	145 mm
Soundbar weight	8600 g
Subwoofer depth	261 mm
Subwoofer width	171 mm
Subwoofer height	390 mm
Subwoofer weight	5300 g