To Next PageTo Next PageWhat to do if there is no sound from LG SH92PB-W?
If you're getting no sound or very low sound from your LG DVD/CD Receiver, first, check that the equipment connected with the audio cable is set to the correct input mode for DVD audio. Ensure the audio cables are securely connected. Also, verify that the connected equipment is powered on. If the problem persists, the audio cable might be damaged and need replacing.
What to do if LG SH92PB-W Receiver remote control does not work?
If the remote control for your LG Receiver isn't working correctly, consider these potential solutions: * Make sure the remote control is pointed directly at the remote sensor on the DVD/CD Receiver. * Ensure you are within about 23 ft (7 m) of the DVD/CD Receiver. * Remove any obstacles that might be blocking the path between the remote control and the receiver. * Replace the batteries in the remote control with new ones.
Why is there no picture from my LG SH92PB-W Receiver?
If you're not getting any picture on your TV from the LG DVD/CD Receiver, first, ensure your TV is set to the correct video input mode so it can receive the DVD signal. Next, check that the video cable is securely connected to both the receiver and the TV. Finally, make sure your TV is turned on.
How to fix loud hum or noise heard from LG SH92PB-W Receiver?
If you're experiencing a loud hum or noise from your LG Receiver, try cleaning the disc first. If that doesn't solve the issue, make sure the speakers and components are securely connected. Also, try moving the TV away from the audio components, as they might be too close together.
How to fix LG SH92PB-W Receiver when it has no power?
If your LG Receiver has no power, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
Why is there no sound from my LG SH92PB-W Receiver?
If you're experiencing no sound or very low sound from your LG Receiver, here are a few things to check: * Ensure the equipment connected with the audio cable is set to receive the DVD audio signal output. Select the correct input mode on the receiver. * Verify that the audio cables are securely connected to the jacks. * Make sure the equipment connected with the audio cable is turned on. * Check the audio connecting cable for damage and replace it if necessary.
How to troubleshoot no picture on LG SH92PB-W?
If you're not getting a picture from your LG Receiver, try the following: * Make sure the TV is set to the correct video input mode to receive the DVD signal output. * Check that the video cable is securely connected to the jacks. * Ensure that the connected TV is powered on.
How to fix LG SH92PB-W Receiver when radio stations cannot be tuned in?
If you're having trouble tuning into radio stations with your LG Receiver: * Ensure the antenna is securely connected and properly positioned. * If using automatic tuning, the signal strength of the stations might be too weak; try tuning in the station manually. * If tuning by scanning preset stations, ensure stations have been preset; if not, preset the stations.
What causes loud hum or noise from LG SH92PB-W and how to fix it?
If you're hearing a loud hum or noise from your LG Receiver, consider the following: * The disc may be dirty, so try cleaning it. * The speakers and components might be poorly connected; ensure they are securely connected. * The DVD/CD Receiver might be too close to the TV; move the TV away from the audio components.
Why is the playback picture quality poor on my LG SH92PB-W?
If the playback picture quality on your LG Receiver is poor, consider the following: * The disc may be dirty, so clean it. * Ensure a disc is inserted. * Make sure you're using a playable disc. * Check that the disc is placed with the playback side down. * Verify the disc is placed correctly within the guide on the disc tray. * If a menu is on the TV screen, press the SETUP button to turn it off. * If the Rating level is set, cancel the Rating function or change the rating level.
General| Audio Channels | 5.1 |
|---|---|
| Bluetooth | Yes |
| HDMI | Yes |
| Audio decoders | Dolby Digital, DTS |
| Disc Types Playable | DVD, CD |
| Type | Home Theater System |
Warnings about opening the unit and electrical shock hazards.
Precautions to prevent fire and electric shock by avoiding rain or moisture.
Safety advice for using and maintaining the power cord.
Identification of controls and connectors on the front of the unit.
Detailed diagram and explanation of all input and output ports on the rear.
Diagram showing button locations and their primary functions.
Guides on connecting the receiver to various TV types (Video, Component, SCART).
Specific instructions for connecting video, component, and SCART cables.
How to connect front, center, rear speakers, and subwoofer to the main set.
Solutions for common issues like no sound from wireless rear speakers.
Steps for connecting the receiver to an HDMI-compatible TV or monitor.
Guide to configuring speaker sizes, volume, and distance for surround sound.
How to block playback of rated DVDs and set parental control levels.
Explains functions like OPEN/CLOSE, PAUSE, SKIP, and SCAN for disc playback.
How to play music files, view ID3 TAG information, and compatibility notes.
How to play DivX video files and access movie menus.
How to store up to 50 FM/AM radio stations for easy access.
Solutions for issues where the unit does not power on or function.
Troubleshooting steps for video output issues like no picture or poor picture.
Solutions for issues related to audio not being heard or being too low.
Addressing disc playback errors, loud hum, or noise problems.
Steps to take if the remote control is unresponsive or malfunctioning.
Technical details for amplifier power output and speaker system performance.
