LG SH92TB-W - User Manual

Questions and Answers

S
sonyaphillipsSep 12, 2025
How to brighten the front panel display on my LG Home Theater System?
- B
  Bryan NguyenSep 12, 2025
  Press DIMMER on the Remote Control of your LG Home Theater System.
S
Scott WeeksAug 25, 2025
Why is my LG Receiver remote control not working?
- C
  Cory MayAug 25, 2025
  If the remote control for your LG Receiver isn't working correctly: * Make sure you're pointing the remote at the receiver's remote sensor. * Ensure you are within 23 ft (7 m) of the receiver. * Remove any obstacles between the remote and the receiver. * Try replacing the batteries in the remote with new ones.
T
Tracy HendersonAug 25, 2025
What to do if my LG SH92TB-W Receiver remote control does not work?
- J
  Jeremy WalkerAug 26, 2025
  If the remote control isn't working, first, ensure that you're pointing it directly at the remote sensor on the LG DVD/CD Receiver. Second, make sure you are within 23 ft (7 m) of the receiver. Third, check for any obstacles between the remote and the receiver and remove them. Lastly, try replacing the batteries in the remote control with new ones.
W
William SmithSep 23, 2025
How to adjust a dim front panel display on my LG SH92TB-W?
- H
  hwhiteSep 23, 2025
  To brighten a dim front panel display on your LG Receiver, press the DIMMER button on the remote control.
R
Rebecca CampbellSep 12, 2025
Why can't I tune into radio stations on my LG Home Theater System?
- S
  Sandra LinSep 12, 2025
  If radio stations cannot be tuned in on your LG Home Theater System, ensure the antenna is securely connected and properly positioned. If tuning in with automatic tuning, the signal strength may be too weak, so try tuning in the station manually. If tuning by scanning preset stations, preset the stations first.
S
Shelby MartinSep 18, 2025
Why is there no picture on my TV from my LG Receiver?
- W
  William AliSep 18, 2025
  If you're not getting a picture from your LG DVD/CD Receiver, here are a few things to check: * Ensure your TV is set to the correct video input mode to receive the DVD signal. * Verify the video cable is securely connected to the jacks. * Confirm that the connected TV is turned on.
B
Benjamin BensonSep 5, 2025
Why is there no picture on my LG Receiver?
- M
  Megan DunnSep 5, 2025
  There are several reasons why you might not see a picture. First, make sure your TV is set to the correct video input mode to receive the DVD signal output from the LG Receiver. Second, check that the video cable is securely connected to the jacks. Finally, verify that the connected TV is powered on.
W
Willie AdamsSep 6, 2025
How to fix loud hum or noise from LG SH92TB-W?
- P
  Paul HuangSep 6, 2025
  If you're experiencing a loud hum or noise, try these steps: First, clean the disc. Second, ensure the speakers and components are securely connected. Third, the DVD/CD Receiver might be too close to the TV, so try moving them further apart.
J
John FergusonSep 18, 2025
How to fix poor playback picture on my LG SH92TB-W Receiver?
- N
  nicolewilliamsSep 18, 2025
  If the playback picture quality from your LG DVD/CD Receiver is poor, consider these potential causes: * The disc is dirty, so clean it. * No disc is inserted, so insert a disc (Check that the DVD or audio CD indicator in the DVD display is lit.). * An unplayable disc is inserted, so insert a playable disc (Check the disc type, colour system and Regional code.). * The disc is placed upside down, so place the disc with the playback side down. * The disc is not placed within the guide, so place the disc on the disc tray correctly inside the guide. * A menu is on the TV screen, so press the SETUP button to turn off the menu screen. * The Rating level is set, so cancel the Rating function or change the rating level.
C
Carla HowardAug 30, 2025
What to do if there is no picture on my LG SH92TB-W Receiver?
- J
  James MoranAug 30, 2025
  If you're not getting a picture on your LG Receiver, here's what to check: 1. Ensure your TV is set to the correct video input mode to receive the DVD signal output. 2. Verify the video cable is securely connected to the jacks. 3. Make sure your TV is turned on.