What to do if the LG Home Theater System remote control does not work?
If the LG Home Theater System remote control isn't working, first, ensure you're aiming it directly at the receiver's remote sensor. Then, make sure you're within 23 ft (7 m) of the receiver and that there are no obstructions blocking the signal. Finally, try replacing the batteries with fresh ones.
What to do if the LG Receiver remote control does not work?
If the remote control for your LG Receiver isn't working properly, try these steps: 1. Point the remote control at the remote sensor on the receiver. 2. Ensure you are within 23 ft (7 m) of the receiver. 3. Remove any obstacles between the remote and the receiver. 4. Replace the batteries in the remote with new ones.
How to fix no sound on LG Home Theater System?
If you're not getting any sound or the sound is very quiet from your LG Home Theater System, first, ensure that the equipment connected with the audio cable is set to the correct input mode for DVD audio. Check that the audio cables are securely connected. Make sure the connected equipment is turned on and if the audio connecting cable is damaged, replace it.
How to stop loud hum from LG Home Theater System?
To address loud hum or noise from your LG Home Theater System, start by cleaning the disc. Ensure the speakers and components are securely connected. If the DVD/CD Receiver is too close to the TV, move the TV away from the audio components.
How to troubleshoot no power on LG Home Theater System?
If your LG Home Theater System is not powering on, ensure the power cord is securely plugged into the wall outlet.
How to fix LG SH92SB-W Receiver when there is no power?
If your LG Receiver has no power, ensure the power cord is securely plugged into the wall outlet. This should restore power to the device.
Why does my LG SH92SB-W have a loud hum or noise, and how can I fix it?
If you are experiencing a loud hum or noise from your LG Receiver, try the following: * Clean the disc. * Connect the speakers and components securely. * Move your TV away from the audio components.
Why is there no picture on my LG SH92SB-W Receiver?
If there is no picture on your LG Receiver, here are a few things to check: * Make sure your TV is set to receive the DVD signal output. * Ensure the video cable is securely connected. * Verify that your TV is turned on.
How to troubleshoot an LG SH92SB-W that does not start playback?
If your LG DVD/CD Receiver does not start playback, consider the following: * Insert a disc, if there is none. * Ensure the disc is playable. * Place the disc with the playback side down. * Make sure the disc is placed correctly within the guide on the disc tray. * Clean the disc if it is dirty. * Press the SETUP button to turn off any menu screen. * Cancel the Rating function or change the rating level if it is set.
Why can't I tune in radio stations on my LG Receiver?
If you are not able to tune in radio stations on your LG Receiver, try the following: * Connect the antenna securely. * Tune in the station manually, as the signal strength may be weak. * Preset the stations, as no stations may have been preset or preset stations may have been cleared.
General| Category | Receiver |
|---|---|
| HDMI Outputs | 1 |
| Bluetooth | Yes |
| USB Port | Yes |
| FM Radio | Yes |
| Audio Formats Supported | Dolby Digital, DTS |
| Color | White |
| Model | LG SH92SB-W |
To Next Page
