Getting Started12
Getting Started
1
4. Fix the screws and wall plugs as shown in the
illustration below.
y
Screws and Wall Plugs are not supplied for
mounting the unit. Recommend the size of
screws is as follows. : Diameter 4mm, length
40 mm or so
y
Screws tighten leaving the screws 3 mm
3 mm
,
Note
5. Hang the main unit on wall as shown below.
To detach the unit, perform it in reverse order.
,
Note
y
Do not install this unit upside down. It can
damage the parts of this unit or be the cause
of personal injury.
y
Do not hang onto the installed unit and avoid
any impact to the unit.
y
Secure the unit rmly to the wall so that it
does not fall off. If the unit falls off, it may
result in an injury or damage to the product.
y
When the unit is installed on a wall, please
make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
>
Caution
To Next Page
Loading...
