Front Panel
Rear Panel
DC IN ·····················Connect to AC Adapter.
USB (Service only) ······S/W download connector.
LAN·····························Connect to router.
OPTICAL IN ···········Connect to an optical device
HDMI IN ········Connect to device with HDMI OUT.
HDMI OUT (TV ARC) ············· Connect to a TV.
Subwoofer Connection
Place the wireless subwoofer near the sound bar and
follow steps below.
a Connect the power cord of the sound bar and the
wireless subwoofer to the outlet.
b Turn on the sound bar. :
The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's green
LED turns on.
Manually Subwoofer Connection
If the subwoofer does not make sound, try to connect
manually.
a Press Pairing button on the rear of the wireless
subwoofer.
• The green LED on the rear of wireless
subwoofer blinks quickly.
b Turn on the sound bar.
c Pairing is completed.
• The green LED on the rear of wireless
subwoofer turns on.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1 (3.3 ft) m to prevent wireless
interference.
> 1 m
(3.3 ft)
The buttons are located on the rear.
LED indicator
1 ·······································Standby
F ································Selects function
-/+ ·······························Adjusts volume
····················Connects wireless network.
···· Adds the additional Music Flow product to
your network. (In case that one or more Music Flow
product is connected.)
LED indicator: Shows connection status.
• White (Blinking): Waiting for network connection
• White (Staying on): Network connection is
completed.
• White (Dimmed): Standby mode with network
connection.
• Green (Staying on): The rst group was set.
• Red (Staying on): Standby mode without network
connection.
LAN
To Next Page
Loading...
