LG SN6Y User Manual

Operating 35
Operating
3
4. When this unit is successfully connected with
your Bluetooth device,
“PAIRED”
[
your device’s name
[
“BT” appears
on the display window.
y
If it is unavailable to display device name
on the unit, “-” will be displayed.
y
To check the connected device’s name,
press
J
on the remote control. The
connected Bluetooth device’s name is
displayed.
,
Note
5. Listen to music.
To play music in your Bluetooth device, refer to
your Bluetooth device’s user guide.
y
When using Bluetooth technology, you have
to make a connection between the unit and
the Bluetooth device as close as possible and
keep the distance.
However it may not work well in the case
below :
- There is an obstacle between the unit and
the Bluetooth device.
- There is a device using same frequency
with Bluetooth technology such as a
medical equipment, a microwave or a
wireless LAN device.
,
Note
y
If Bluetooth connection does not work well,
try pairing it again.
y
The sound may be interrupted when the
connection has interference by the other
electronic waves.
y
Pairing is limited to one Bluetooth device per
unit and multi-pairing is not supported.
y
Depending on the type of the device, you may
not be able to use the Bluetooth function.
y
You can enjoy Bluetooth function using
smart phone, MP3, Notebook, etc..
y
The more distance between the unit and the
Bluetooth device, the lower the sound quality
becomes.
y
Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets too far from the unit.
y
When Bluetooth connection is disconnected,
connect the Bluetooth device to the unit
again.
y
When the unit is not connected, “READY”
appears in the display window.
y
When you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
y
If you change to another function after
connecting Bluetooth, Bluetooth connection
will be disconnected. And you return to
Bluetooth function, Bluetooth connection
will be connected automatically.
,
Note

LG SN6Y Specifications

General

Woofer	Yes
Speaker type	3-way
Number of drivers	4
Speaker placement	Floor, Tabletop/bookshelf
Audio output channels	3.1 channels
Number of woofer drivers	1
Audio decoders	DTS Digital Surround, Dolby Digital
RMS rated power	420 W
Audio sample rate (24bit)	96 kHz
Product color	Black
Volume control	Digital
Recommended usage	Home
HDCP version	1.4
Bluetooth version	4.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Power source type	USB
Power consumption (standby)	0.5 W
Power consumption (typical)	38 W
Subwoofer power consumption	33 W
Package weight	11802.47 g
Cables included	Optical
Other operating systems supported	Android, iOS
Soundbar speaker RMS power	- W
Subwoofer type	Active subwoofer
Subwoofer location	Separate
Subwoofer connectivity	Wireless
Country of origin	China
Audio formats supported	AAC, AAC+, DTS, FLAC, LPCM, MP3, OGG, WAV

Weight and Dimensions

Depth	436.88 mm
Width	1158.24 mm
Height	226.06 mm
Weight	8754.33 g
Soundbar weight	3447.3 g
Subwoofer depth	292.1 mm
Subwoofer width	180.34 mm
Subwoofer height	391.16 mm
Subwoofer weight	5307 g