LG SN9YG - Remote Control Operation; Battery Replacement and Standby Modes; Volume Control

Getting Started10
Getting Started
1
Remote control
Replacement of Battery
Remove the battery cover on the rear of the remote
control, and insert the battery with
4
and
5
matched correctly.
Risk of re or explosion if the battery is replaced by
an incorrect type.
a
1
(Standby)
- Switches the unit ON or OFF.
y
Networked standby: It allows the unit to switch to standby mode.
To turn on Networked standby function, Press
1
.
To turn off Networked standby function, press
1
for about 3 seconds.
b
VOL (Volume)
o/p
- Adjusts speaker volume.