35
Connecting with an HDMI Cable
You can transmit TV audio to the product by connecting the TV to the product with an HDMI cable. Add a
variety of 3D effects to the original audio to fill the room with a deep, rich sound.
Watching TV after connecting with an HDMI cable
a Using the HDMI cable, connect the HDMI™ d TV (eARC / ARC) terminal on the back of the
product to the HDMI IN (ARC) terminal on the TV as shown in the picture.
HDMI
TM
▶TV
(eARC/ARC)
HDMI
TM
IN
HDMI IN
(ARC)
HDMI
TM
▶TV
(eARC/ARC)
b Press the Function button repeatedly until “OPT/HDMI ARC” appears on the status display.
c Press the Settings button on the TV remote control to enter the [Speaker] menu and set the output
speaker to [HDMI ARC]. Settings and menu items may vary depending on the TV manufacturer.
d When the TV is properly connected to the product, “ARC” or “E-ARC” will appear on the status
display.
Note
• E-ARC supports high-quality audio such as DTS-HD Master Audio™, DTS:X
®
, Dolby TrueHD, and Dolby
Atmos
®
.
• If you wish to use Dolby Atmos
®
or DTS:X
®
, the connected device and its content should support Dolby
Atmos
®
or DTS:X
®
.
• Ensure that your TV supports the eARC function before you turn on eARC from the Settings menu.
For more information on how to use this function, please refer to your TV’s user manual. Settings may
vary depending on the TV.
• Use a certified cable with the HDMI logo.
To Next Page
Loading...
Need help?
General
