4
g Connecting the product to your smartphone via Bluetooth
([ See “Connecting via Bluetooth” on page 42.)
A Tap the Settings button on your smartphone and select Bluetooth. Turn on the Bluetooth
function. ( Off > On)
B Press the Bluetooth pair
button. After a moment, you will see “BT READY” on the status display.
C Find and select “LG_Speaker_SG10TY_XXXX”.
D When the product is connected to your smartphone via Bluetooth, you can see the status display
change from “PAIRED” [ “Connected Bluetooth device name” [ “BT”.
Manually connecting the soundbar to the wireless subwoofer or rear
speakers ([ See “Connecting the wireless subwoofer manually”,
“Manual connection” on page 8, 11.)
If you see a red LED on the wireless subwoofer or rear speaker, it means that the soundbar is not
connected to the speakers. If this is the case, connect them in the following order.
A Press the Power
button on the soundbar to turn it off.
B Press the PAIRING button on the back of the wireless subwoofer or rear speaker. Check if
each LED blinks green.
- If you still see a red LED on the wireless subwoofer, press and hold the button on the back of
the subwoofer again.
C Press the Power
button on the soundbar to turn it on.
D When the connection is established, you will see a green LED light on the wireless subwoofer
or rear speaker light up in green.
To Next Page
Loading...
Need help?
General
