58
e Tighten screws for fixing the wall mount to the holes. At this time, tighten the screws to a torque 12
kgf/cm
1.
Note
• When you mount the unit on the wall, fix it carefully so as not to drop.
• Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the
product and cause it to fall.
• Professional installers should read this manual carefully to ensure proper installation.
• Professional installers should forward this manual to customers after installation and encourage them
to read and store it in a convenient place for future reference.
• After reading the installation manual, keep it in a convenient place for future reference.
• Ask a professional installer appointed by the store for installation of the product. Installation by
someone other than a professional installer is extremely dangerous and may result in personal injury.
• Do not install the product in an unstable site that cannot withstand its weight. If the installation site
lacks sufficient rigidity, the product may fall and cause personal injury.
• Contact a professional installer appointed by the store prior to moving or replacing the product after
installation. Installation is a technical task and safety issues may arise if an individual attempts to
install or move the product personally.
• Do not hang on the product or subject it to severe impact after installation. Doing so may cause the
product to fall and cause personal injury.
To Next Page
Loading...
Need help?
General
