LG Stanby ME User Manual

1
M4L34
M4L10
Head
washer
AA
1X4X
Installation
A Insert the stand base into the styrofoam groove as shown in the gure.
B Insert the bar into the hole of the stand base along the groove until it reaches the parting line.
C Secure the four screws.
>10 kg
A
M4L34
4X
B
C
www.lg.com
User Install Guide
*MFL718845022201rev01*

LG Stanby ME Specifications

General

Brand	LG
Model	Stanby ME
Category	Racks & Stands
Language	English

Summary

LG StanbyME Installation Guide

Assemble Stand Base and Secure Screws

Insert the stand base, bar, and secure with four screws as per instructions.

Orient Power Cable and Holder

Check and ensure the correct orientation of the power cable and cable holder.

Attach Power Plug to Screen

Securely attach the power plug to the designated spot on the screen's back cover.

Mount Screen to Stand

Insert stand hook into back cover groove and secure the cable holder with one screw.

Install Stand Ring Cover

Align and install the ring cover onto the stand, ensuring it is tightly secured.

LG StanbyME Disassembly Guide

Remove Screen Cover

Position the screen vertically and carefully remove the cover using a wedge or hand.

Disconnect Cable Holder and Lower Screen

Remove the cable holder screw and lower the screen by releasing the rear lever.

Separate Screen and Disassemble Stand Bar

Lift and separate the screen, then remove screws to detach the stand bar.