LG StudioWorks 563A User Manual

A1
Introduction
Thank you for purchasing a high resolution monitor. It will give you high
resolution performance and convenient reliable operation in a variety of
video operating modes.
Features
The Studioworks 563N/563A is a 15 inches (14.0 inches viewable ) intelligent,
microprocessor based monitor compatible with most analog RGB (Red, Green,
Blue) display standards, including IBM PC
®
, PS/2
®
, Apple
®
, Macintosh
®
, Centris
®
,
Quadra
®
, and Macintosh II family.
The monitor provides crisp text and vivid color graphics with VGA, SVGA, XGA,
and VESA Ergonomic modes (non-interlaced), and most Macintosh compatible
color video cards when used with the appropriate adaptor. The monitor's wide
compatibility makes it possible to upgrade video cards or software without
purchasing a new monitor.
Digitally controlled auto-scanning is done with the micro-processor for horizontal
scan frequencies between 30 and 61kHz, and vertical scan frequencies
between 50-120Hz.
This monitor is capable of producing a maximum horizontal resolution of 1024
dots and a maximum vertical resolution of 768 lines.
The microprocessor-based digital controls allow you to adjust conveniently a
variety of image controls by using the OSD (On Screen Display).
On Screen Display(OSD) adjustments in seven languages:
English, Deutsch, Français, Español, Italiano, Português, Korean for ease of
setup and screen optimization
Plug and play capability if supported by your system.
This monitor has DDC 2B function.*
Compliant with the following regulated specifications :*
- EPA ENERGY STAR
- MPR II (Applies to 563N only)
ENGLISH
* For detailed information, please refer to the Reference Guide provided .

LG StudioWorks 563A Specifications

General

Screen Size	15 inches
Panel Type	CRT
Display Type	CRT
Dot Pitch	0.28 mm
Aspect Ratio	4:3
Input Connectors	VGA
Brightness	Unknown
Contrast Ratio	Unknown
Vertical Scan Rate	50-120Hz
Resolution	1024x768

Summary

Introduction to the Monitor

Connecting the Monitor

Monitor Stand Installation

Steps for attaching the tilt/swivel stand to the monitor base.

Location and Function of Controls

Front View Controls

Identification of buttons and indicators on the front panel.

Rear View Ports

Identification of power and signal connectors on the rear panel.

Control Panel Functionality

Front Panel Controls Overview

Details on MENU, SELECT, Power buttons and Power (DPMS) indicator.

On Screen Display (OSD) Adjustment

OSD Selection and Adjustment Items

Image Adjustment Controls

Adjusting contrast, brightness, H/V position, and H size.

Advanced OSD Image Adjustments

Geometric and Alignment Controls

Correcting V SIZE, Pincushion, Trapezoid, Pin Balance, and Parallelogram.

OSD Color, Recall, and Language Settings

Color Temperature and Preset Recall

Setting color temperature and recalling factory preset display modes.

OSD Language Selection

Choosing the display language for OSD menus.

OSD Demagnetization and Information

Deguass and Information Display

Demagnetizing the picture and accessing preset mode information.

Video Memory Modes

Display Modes and User Modes

Overview of factory preset and user-defined display modes.

Recalling Display Modes

How the monitor automatically recalls or manually recalls display settings.

Troubleshooting Common Issues

Self Diagnostics and Frequency Errors

Resolving 'SELF DIAGNOSTICS' and 'OUT OF FREQUENCY' messages.

Power LED and Image Display Issues

Troubleshooting amber power LED and abnormal image shapes.

Monitor Specifications

Picture Tube and Sync Input Details

Specifications for picture tube, deflection, dot pitch, and sync input.

Video Input, Power, and Dimensions

Details on video input, power consumption, dimensions, weight, and environmental conditions.