OSD ON/OFF Enter button
Use this button to start/enter and exit from the On Screen
Display (OSD). If there is no OSD on the screen, One press of
this button will show the Main Menu. To remove the display,
wait 10 seconds.
OSD Select/Adjustment Control
Use this buttons for selecting (highlighting) an OSD icon to be
adjusted. It is also used for selecting the level of the selected
item to be adjusted.
On Screen Display (OSD) Control Adjustment
Making adjustments to the image size, position, and operating
parameters of the monitor is quick and easy with the On Screen
Display Control system, using only the ENTER button and Adjustment
Control buttons. A quick example is given below to familiarize you with
the use of the controls. Following this section is an outline of the
available adjustments and selections you can make using the OSD.
Example;
Note : (Monitor and PC should be ON, with an image or prompt on
the screen). A single press of the ENTER button will present you with
the Main Menu as below, with the first item H-position( )
highlighted.
9
To Next Page
Loading...
