24
OPENING AND CLOSING THE PANTS
HANGER
1 Toopen,foldthehookdown
towardthe
hangerbladestounlock
andseparatetheblades.
2 Oncepantsareinserted,bringtheblades
togetherandrotatethehookupandaway
fromthebladestolocktheminplace.
Hanging Pants On the Pants Hanger
1 Removeallobjectsfrompantspocketsand
buttonthebackpockets.
2 Foldpantsalongcrease
lines(orwherecrease
lineswouldbe),and
attachthepantshanger
attheendsofthepants
legs.
3 Tuggentlyonthesidesofthepantslegs.
Makesurepantsarestretchedtightwithin
thehanger,withnowrinkles,andwillnot
falloutofthehangerduringthecycle.
4 Placethepantshangeronthemoving
hangerorinthePantsCreaseCare.
USING THE PANTS CREASE CARE
1 OpenthePantsCreaseCarebypressingon
theiconontheside.
2 Hangthepantshangeronthehookabove
thePantsCreaseCarethatbesttsthe
lengthofthepantsbeingpressed.
If the pants are longer, use the higher hooks
to keep the pants from hitting the floor of the
cabinet.
Pants should be no wider than 38 in. (96 cm)
or longer than 43.3 in. (110 cm). Check the
size of the pants before using the Pants
Crease Care. If pants are too large, use the
moving hanger.
3 Makesurethepantsare
hangingstraight.
Check the creases on the
legs to make sure they
are lined up. If the pants
are not folded properly at
the creases and hanging
straight, double lines may
appear at the pants' edges.
4 ClosethePantsCrease
Care,thenstraightenthe
pantsoncemore.
Gently tug the edges
of the pants to smooth
out any wrinkles. Make
sure the pants are hang-
ing straight in the Pants
Crease Care.