EasyManua.ls Logo

LG Styler S3RERB - Things to Check before Servicing

LG Styler S3RERB
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
57
9
Things to Check before Servicing
Symptoms Checkpoints Instructions
Error
Message
[Feed Water]
icon is
flickering.
“Is there enough water in the water supply
tank?”
“Is the water supply tank in place?”
Fill the water supply tank with water and put it
back into the product.
Put the water supply tank back into the product.
[Discard Water]
icon is
flickering.
Isn’t the water drain tank full of water?”
“Is the water drain tank in place?”
Empty the water drain tank.
Put the water drain tank back into the product.
[Door Open]
icon is
flickering.
"Didn’t you operate the product
without closing the door completely?"
Close the door tight.
[AE]
is displayed.
“Do you hear the sound of wind?
After pulling out the power plug,
contact the service center
or its retail store.
[LE]
is displayed.
“Do you hear the sound of wind?
[LE2]
is displayed.
“Do you hear the sound of wind?
[E1]
is displayed.
“Isn't the steam generated properly?”
[E4]
is displayed.
“Isn't the steam generated properly?”
[TE1]
is displayed.
“Doesn’t Drying work properly?”
[TE2]
is displayed.
“Doesn’t Drying work properly?”
[TE3]
is displayed.
SDSqDoesn’t Drying work properly?SDSq
[TE5]
is displayed.
SDSqDoesn’t Drying work properly?SDSq
It is not
a sign of
malfunc-
tion.
Smoke comes out whenever
the door is opened.
“Did you open the door during the opera-
tion?”
It might be the steam generated due to the course
operation.
It is not a sign of malfunction.
I fully filled the water supply
tank and used it once, but
there is no water in the tank.
“Did you operate the product for the first
time?”
Because there is no water stored in the product
when using the product for the first time, a large
amount of water is needed. From the second use,
the amount of water needed is reduced.
When operating the product, I
hear the sound of a “snore”.
“Did you hear the sound at the beginning
of the operation?”
That is a sound of moving hanger balancing the level
before operation. It is not a sign of malfunction. If,
however, the noise gets worse, contact the service
center or its retail store.
The product moves left and
right when in operation.
“Did you put in wet clothes?”
Drying time may be lengthened for excessively wet
clothes. Dry the clothes before you put them in the
Styler. Drying time may be lengthened depending
on the wet states and volume of clothes. When dry-
ing is finished, the Styler will automatically stop.
During the operation, I hear
the whirring sound.
“Did you hear the sound during the opera-
tion?”
That is a sound of the compressor running, just like
that of refrigerator, for the Drying process. It is not
a sign of malfunction. If, however, the noise gets
worse, contact the service center or its retail store.
During the operation, I hear
the revolving sound.
“Did you hear the sound during the opera-
tion?”
That is a sound of the compressor running to do the
Drying. It is not a sign of malfunction. It is not a sign
of malfunction. If, however, the noise gets worse,
contact the service center or its retail store.
During the operation, I hear
the sounds of boiling and
steam release.
“Did you hear the sound during the opera-
tion?”
That is a sound of boiling water to make steam and
spraying the steam onto the clothes. It is not a sign
of malfunction. It is not a sign of malfunction. If, how-
ever, the noise gets worse, contact the service center
or its retail store.
During the operation, I hear
the sound of running water.
“Did you hear the sound during the opera-
tion?”
That is a normal sound of filling water to make
steam. It is not a sign of malfunction. If, however, the
noise gets worse, contact the service center or its
retail store.

Related product manuals