98
•
The Styler moves left and right when it operates.
12-32. Vibration and Noise #1
If the product is not level, it may move left and right due to the movement of the moving hanger and
may cause the door to open.
In this case, rotate the levelling leg at the bottom of the product to adjust the level.
If the product is installed on the unstable oor such as wooden oor, the product may move or pro-
duce noise.
Move the product to the solid oor.
[Tip] Loosen the levelling leg as little as possible.
Once you nish adjusting the level, tighten the clamping nut.
▲ Lowering the leg ▲ Raising the leg
Clamping nut
Raising the legLowering the leg
To Next Page
