Operation
22
Notification to
replace the filter
Reset time to
replace
CAUTION
- Align the filter cover where it was
originally located and then turn
clockwise about 30 degrees to
install the filter cover.
How to install
the new filter
Setting the time
to replace
(Reset)
Close the refrigerator door and press
the button on tahe display panel for
more than
5 seconds to check that the Replace lamp is
turned off.
To use the Pure N Fresh, press the
button on the display panel to switch to
AUTO or POWER mode.
(Every time the user presses the button, the function of Pure N Fresh will switch in the
order of OFF → AUTO → POWER → OFF.)
Switch to use
mode
OFF AUTO POWER OFF
Be careful not to switch the direction of the Pure N
Fresh inserted on the filter cover.
Install the new filter.
- Insert the new Pure N Fresh in the filter
cover so that the white part of the filter
and the BACK label is visible.
To Next Page
Loading...
