20
OPERATION
•
88
: When a programme is selected, the default time for that programme is displayed. The time can
change as options are selected.
- The time shown is only an estimate. Several external factors (laundry size, room temperature,
incoming water temperature, etc.) can affect the actual time.
•
F
: This icon turns on when the load sensing has detected the laundry size.
•
Y
: This icon turns on when the
Water Level
button is pressed to adjust the water level. When the
water level is selected, the water level is indicated in the time display.
•
min
: This icon turns on when the remaining time is indicated in the time display.
•
Q
: This icon turns on when the
Program
button is pressed to select the desired programme.
Programme Table
Washing Programme
Wash programmes are designed for the best wash performance for different types of clothes.
• Press the
Program
button to select the desired programme.
• When you select a wash programme, the light for the corresponding wash programme will turn on.
Normal
Description Use this programme to wash normal laundry. The built-in sensor detects the
weight of the laundry, calculating wash, rinse and, spin settings accordingly.
• If water or wet laundry is already in the drum before the start, the water level
will be increased.
• For lightweight and bulky items, the water level may be too low. Increase the
water level manually.
Wool
Description Use this programme to wash delicate fabrics such as lingerie and woollens. Before
washing, check the care label for the washing instructions.
• This programme uses a slow spin to prevent the clothes from being damaged,
so the laundry has more moisture than normal.
• Hang or lay your delicates flat when you dry them.
• Only cold water will be used for this programme as hot water may damage
laundry.
To Next Page
Loading...
