AD5235
26
PPoowweerr SSaavvee MMooddee
When the phone is in an area without service for about
5 minutes, it stops searching for service and enters into
the Power Save Mode. When your phone activates this
feature, Power Save is displayed on your screen. The
phone automatically checks for service periodically or
you can check manually by pressing any key.
MMaakkiinngg aa CCaallll
Every time you make a call, follow these steps:
1) Make sure that the phone is turned on. If not, hold
down for 2 seconds.
2) Type the phone number and then press .
If the phone is locked, type the lock code. The lock
code/password is commonly 0000 by default.
3)
To end the call press .
CCoorrrreeccttiinngg DDiiaalliinngg EErrrroorrss
If you typed a wrong number, press the Key once
to delete the lastly typed digit, or Hold down the Key
for 2 seconds to delete all the typed digits at the
same time.
To Next Page
Loading...
