AD5235
29
AAddjjuussttiinngg LLoocckk FFuunnccttiioonn
Used to prevent other persons from using your phone
without your permission.
There are two ways to enable the Lock Function - with
one key and by using the Menu.
1) In standby mode, to activate the lock mode quickly,
press the (for 3 seconds).
NOTE : To cancel the Lock Mode, Press Soft Key 2
Cncl, then enter your password (4 digits). The
lock code/password is commonly 0000 by
default.
SSeelleecctt PPrrooffiilleess
1) In standby mode, press .
2) Select one of four Profiles Vibrate Only, Silent,
General and Loud with .
3) Press Soft Key 1 Act.
NOTE : Headset or Car Profile is automatically set
when headset or carkit is installed in the mobile
phone.
BASIC FUNCTIONS
To Next Page
Loading...
