Safety Precautions
6 Air-to-Water Heat Pump
Installation
• Always check for gas (refrigerant) leakage after installation or repair
of unit.
- Low refrigerant levels may cause failure of unit.
• Keep level even when installing the unit.
- To avoid vibration or water leakage.
• Use two or more people to lift and transport the unit.
• Avoid personal injury.
Operation
• Do not use the unit for special purposes, such as preserving foods,
works of art, etc.
- There is risk of damage or loss of property.
• Use a soft cloth to clean. Do not use harsh detergents, solvents, etc.
- There is risk of fire, electric shock, or damage to the plastic parts of
the unit.
• Do not step on or put anything on the unit.
- There is risk of personal injury and failure of unit.
• Use a firm stool or ladder when cleaning or maintaining the unit.
- Be careful and avoid personal injury.
• Do not turn on the breaker or power under condition that front panel,
cabinet, top cover, control box cover are removed or opened.
- Otherwise, it may cause fire, electric shock, explosion or death.
1,MFL68026605,영영 2017. 8. 1. 영영 11:48 Page 6
To Next Page
Loading...
Need help?
General
