EasyManua.ls Logo

LG Transpyre - Page 79

LG Transpyre
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
77
Settings
Touch zoom
: Tap the
Touch zoom
switch (at the upper-right corner of
the screen) to toggle it On or Off. On allows you to zoom in and out by
triple-tapping the screen.
Message/call voice notifications
: Tap the
Message/call voice
notifications
switch (at the upper-right corner of the screen) to toggle
it On or Off. On allows you to hear automatic spoken alerts for incoming
calls and messages.
Lower screen brightness
: Checkmark to dim the screen's backlight for
less contrast.
Accessibility shortcut
:
Open accessibility options quickly on any screen.
Text-to-speech output
: Tap to customize text-to-speech (TTS) settings.
HEARING
Audio type
: Sets the audio type. Choose
Mono
or
Stereo
.
Sound balance
: Routes the sound through both the right and left
channel when a headset is connected. To manually set the audio route,
move the slider on the sound balance slide bar to set it.
Flash alerts
: Checkmark to set the LED (at the upper-left of the phone) to
flash (or blink) for incoming calls and notifications.
Turn off all sounds
: Checkmark to turn off all device sounds.
Captions
: Tap the
Captions
switch (at the upper-right corner of the
screen) to toggle it On or Off. On customizes caption settings for those
with hearing impairments. Set
Language
,
Font size,
and
Caption style
.
PHYSICAL AND MOTOR
Touch feedback time
: Sets the touch feedback. Choose from
Short
,
Medium
, and
Long.
Touch assistant
: Tap the
Touch assistant
switch to toggle it On or Off.
On allows you to replace the hardware keys with a Touch assistant board
. Tap the Touch assistant icon to be able to tap its
Power
button,
Home
button,
Volume down
button,
Volume up
button, and the
1/2
button (
Screen capture
button,
Accessibility
button and
Pinch
button).
Draw a "C" ("call") on the board to automatically display the Dial tab. Draw
an "M" on the board to automatically display the Messaging application.

Table of Contents

Related product manuals