STD. WALL-MOUNTED | 79
Standard Wall-Mounted
Due to our policy of continuous product innovation, some specications may change without notication.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
Factory Supplied Parts
Factory Supplied Materials
• Owner’s Manual
• Installation Manual
• Level
• Screwdriver
• Electric drill
• Hole core drill
• Flaring tool set
• Spanner (Half union)
• Thermometer
Factory Supplied Parts and Materials
Table 38: Parts Table.
Required Tools
STANDARD WALL-MOUNTED INDOOR UNITS
Part Quantity Image
Installation Plate One (1)
Type “A” Screws Five (5)
Type “B” Screws
(M4 x 12L)
Two (2)
Wireless
Controller with Holder
HVT: AKB73635606
HSV: AKB73835312
One (1)
7,000 ~ 15,000 Btu/h Indoor Units
18,000 and 24,000 Btu/h Indoor Units
• Read all instructions before installing the product.
• Installation work must be performed by authorized personnel and in accordance with the national wiring standards and all local
codes.
To Next Page
Loading...
Need help?
General
