2005 Product Data 11
3. Features & Benefit
LG Wall Mounted Split models feature a Dehumidification
mode to remove uncomfortable humidity from the room
without over cooling.
Auto Clean
The main cause of air conditioner's odors is molds that
breed in the heatexchanger. If you turn off the air condi-
tioner as it is, molds and bacteria will breed in the wet
heat exchanger.
The automatic cleaning function will dry the wet heat
exchanger to prevent molds and bacteria from breeding.
It will eliminate air conditioner's odors and save you from
frequent cleaning efforts.
Conventional
Since the surrounding temperature is
measured after the air from the unit is
widely distributed, an accurate assess-
ment of the air is not possible.
Healthy
Dehumidification
By increasing the Vane Angle, a bet-
ter assessment of the actual tempera-
ture is possible to prevent over cool-
ing.
Indoor Temperature Distribution Chart
When you press "Auto Clean”, Auto clean starts after
cooling operation.
In 30 minutes, Auto clean" dries the inner
part of Air conditioner.
1STEP :
Dries the evaporator with super-weak, low-
noise air blowing, and removes remaining moisture.
2STEP :
Fundamentally removes the sources of molds
once again through the neo plasma system.
Healthy Dehumidification
To Next Page
Loading...
Need help?
General
