Page 3/5 V3 - 2020
LG TWINWash® - Installation Guide (Large)
Follow the steps below for a quick and simple installation. Further information can be found in the box.
Lift & Secure (Cont.)
Pull out the mini washer drawer, and
secure the front with 2x large screws
on each side.
Secure the right side with 2x large
screws on each holder.
Use the locking nut to secure the 4 front
loader feet in place.
Wind out the front loader feet to ensure
they are gently touching the mini washer.
Secure the rear with 2x large screws on
each holder.
Remove the transit bolts from the rear
of the front loader. Cover holes with
caps provided.
109
1312
11
14
Connect Drain Hose
Using pliers, connect the drain hose
to the mini washer with the included
tension clamp. Ensure the curved end
is in the upright position.
Fit the remaining ends of the front loader
& mini washer drain hoses into the
Y piece using Tension Clamps.
Using zip ties, and the arch bracket -
secure & neaten the drain hoses and
place them into the spigot, or sink.
15 16 17
To Next Page
Loading...
