Page 4/5 V3 - 2020
LG TWINWash® - Installation Guide (Large)
Follow the steps below for a quick and simple installation. Further information can be found in the box.
Connect Water Hoses
Short Hose: Connect To
Cold Tap.
Long Hose: Back of the
front loader (Cold).
Connect hot water line
between the front loader and
tap as per normal using the
last long hose.
Long Hose: Back of the
mini washer.
Use the T piece to join all
three hoses together.
Check for any leaks and
ensure there are no kinks.
Connect the water hoses as below. Ensure that each end has the black washer inserted.
Hand tighten with the aid of the cloth for the best tension. Do not over tighten with any mechanical aid.
18 19
22
20 21
23
Move & Level
by gently ‘walking’ the washer.
Use a level and make adjustments to
the front feet of the mini washer.
Tighten the locking nuts to secure.
Use anti-skid pads if necessary.
24 25 26