30
Legacy USB Support
There are two options to this field: Enabled, and Disabled. This field allows you to enable or disable the
legacy USB support.
Boot-time Diagnostic Screen
Enables the Boot-time Diagnostic Screen.
Battery Charge Stop Percentage
Set Battery Charge Stop Percentage.
Fan Mode Control
Set Fan Mode Control.
Fn Key Setup
Set Sticky fn key function.
Wake On Lan
Enables Wake On Lan.
PXE/Remote Boot OPROM
Enables PXE/Remote Boot.
Execute-Disable Bit Capability
Enables Execute-Disable Bit Capability.
Advanced menu
Ch3. System information
Security menu
Supervisor Password Is
This shows the system’s supervisor password has been set, or not.
Set Supervisor Password
Set Supervisor Password.
User Password Is
This shows the system’s User Password has been set, or not.
Set User Password
Set User Password.
Password on boot
Enables Password on boot.
HDD Password Is
This shows the system’s HDD Password has been set, or not.
Set HDD Password
Set HDD Password.
To Next Page
Loading...
