To Next PageTo Next PageWhat to do if my LG UltraGear 24GN50WB screen retains an image?
If your LG Monitor screen retains an image, it's likely due to displaying a still image for an extended period. To prevent this and extend the monitor's lifespan, use a screensaver.
Why is my LG monitor screen display unstable and shaky, and why do images leave shadow trails?
If your LG monitor's screen display is unstable, shaky, or images leave shadow trails, it might be due to the selected resolution. If the resolution is HDMI 1080i 60/50 Hz (interlaced), the screen may flicker. Try changing the resolution to 1080p or the recommended resolution.
How to fix no sound from the headphone port on my LG UltraGear 24GN50WB?
If there is no sound from the headphone port on your LG monitor, first ensure that the headphone port connections are properly made. Try increasing the volume using the joystick. Also, set the audio output of your PC to the monitor you are using by going to Control Panel > Hardware and Sound > Sound and setting the Monitor as the default device (on Microsoft Windows).
How to get sound from the headphone port on my LG Monitor?
If there is no sound from the headphone port on your LG Monitor, first ensure that the headphone port connections are made properly. Then, try increasing the volume using the joystick. Finally, set the audio output of the PC to the monitor you are using. On Microsoft Windows, go to Control Panel > Hardware and Sound > Sound and set the Monitor as the default device.
Why is nothing displayed on my LG UltraGear 24GN50WB screen?
There could be several reasons why your LG Monitor screen is blank: * Ensure the power cord is securely plugged into the outlet. * Verify the power cable connection and press the power button. * Confirm the correct input is enabled via Menu > Input. * If the monitor is in sleep mode, move the mouse or press a key. Also, check that your computer is on. * If the signal from the PC is outside the monitor's frequency range, refer to the Product Specification section of the manual to set the appropriate frequency. * Check and reconnect the signal cable between the PC and the monitor. * Install the display driver from the LG website and ensure your graphics card supports Plug and Play.
What to do if there is no sound from the headphone port on my LG Monitor?
If you're not getting any sound from the headphone port on your LG Monitor: * Ensure that the headphone port connections are properly made. * Try increasing the volume using the joystick on the monitor. * Set the audio output of your PC to the monitor. In Microsoft Windows, go to Control Panel > Hardware and Sound > Sound and set the Monitor as the default device.
Why is the display color abnormal on my LG UltraGear 24GN50WB?
An abnormal display color on your LG monitor can be due to several factors. First, ensure that the color is set to 24 bit (true color) or higher in your computer's display settings (Control Panel > Display > Settings > Color Quality in Windows). Also, check that the signal cable is properly connected; try reconnecting it or reinserting the PC's graphics card. It's worth noting that pixilated spots (red, green, blue, white, or black) may appear on the screen, which is normal for an LCD screen.
How to fix unstable and shaky screen display on LG UltraGear 24GN50WB?
If your LG Monitor's screen display is unstable, shaky, or images leave shadow trails, it may be due to the resolution being set to HDMI 1080i 60/50 Hz (interlaced). Change the resolution to 1080p or the recommended resolution to resolve this issue.
Why does the screen retain an image on my LG Monitor?
Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image on your LG Monitor. To extend the lifetime of the monitor, use a screensaver.
Why is there no sound from the headphone port on my LG UltraGear 24GN50WB Monitor?
If there is no sound from the headphone port on your LG Monitor, ensure that the headphone port connections are properly made. Try increasing the volume using the joystick. Also, set the audio output of the PC to the monitor you are using by navigating to Control Panel > Hardware and Sound > Sound and setting the Monitor as the default device in Microsoft Windows.
General| Screen Size | 24 inches |
|---|---|
| Panel Type | IPS |
| Refresh Rate | 144 Hz |
| Contrast Ratio | 1000:1 |
| Aspect Ratio | 16:9 |
| Color Gamut | sRGB 99% |
| HDR | HDR10 |
| Adaptive Sync | AMD FreeSync Premium |
| VESA Mount | 100 x 100 mm |
| Resolution | 1920 x 1080 |
| Response Time | 1 ms |
| Connectivity | HDMI, DisplayPort |
| Viewing Angle | 178° |
