16
ENGLISH
: Wall Mount Plate
: Back of the Monitor
: Standard screw
: Max. 8 mm
USING THE MONITOR
Press the joystick button, go to Settings → Input, and then select the input option.
CAUTION
• Do not press the screen for a prolonged time. This may cause image distortion.
• Do not display a still image on the screen for a prolonged time. This may cause
image retention. Use a screensaver if possible.
NOTE
• When connecting the power cord to the outlet, use a grounded (3-hole) power
strip or a grounded power outlet.
• The monitor may flicker when turned on in an area where the temperature is low.
This is normal.
• Sometimes red, green, or blue spots may appear on the screen. This is normal.
To Next Page
Loading...
