ENGLISH
28
Meeting Room
• Input Shortcut
-
Refer to Installation Menu
Portal Settings
Input Shortcut. (See p. 47)
• Network Ready
-
Monitor is turned off, but you can control power internally through the network.
• WOL
-
Refer to Installation Menu
Network
Wake On LAN. (See p. 31)
• DPM
-
Refer to Installation Menu
General
Configuration Setup
DPM. (See p. 38)
Fail Over
• Set the priority of the input devices when a fault occurs.
-
Fail Over : Turns on or off.
-
Input Priority : Set the priority of input sources for fail over.
-
Reset : Reset to initial settings.
• The input will change to Live TV when all input sources have no signal and AV Jack is not connected.
• SIMPLINK, Auto Sensing and Fail Over cannot work simultaneously. If SIMPLINK or Auto Sensing is set to On, Fail Over is automatically set to Off.
Play Via URL
• Play content you want to play automatically through the built-in web browser.
-
URL Loader: Turns Play via URL on or off.
-
Set URL : Enter the URL address to display automatically.
-
Preview : Preview your desired website by accessing the specified URL.
-
Save : Save the specified URL.
-
Reboot to Apply : Restarts the TV after saving the specified URL.
-
Reset : Reset to initial settings.
NTP Server Setting
• Allows you to set other NTP servers other than the basic NTP server.
To Next Page
Loading...
