LG UR76 Series - Command Reference List; Power, Aspect Ratio, Mute, and Volume Commands; Picture and Energy Saving Commands; Configuration, Equalizer, Tune, Programme Commands

ENGLISH
74
• If not use the remote-controller with data formats
recommended, IR output signals will be suppressed
automatically by IR receiver.
• In this case, LG does not guarantee IR working function.
• To make sure of this matter, here are two methods as below.
-
Use the remote-controller with suitable data
formats.
-
Use the IR dongle receiver of the set-top box.
Command Reference List
(Depending on model)
Command1 Command2
Data
(Hexadecimal)
01. Power k a 00 to 01
02. Aspect Ratio k c (See p. 75)
03. Screen Mute k d (See p. 76)
04. Volume Mute k e 00 to 01
05. Volume
Control
k f 00 to 64
06. Contrast k g 00 to 64
07. Brightness k h 00 to 64
08. Colour k i 00 to 64
09. Tint k j 00 to 64
10. Sharpness k k 00 to 32
11. OSD Select k l 00 to 01
12. Remote
Control Lock
Mode
k m 00 to 01
13. Balance k t 00 to 64
14. Colour
Temperature
x u 00 to 64
15. Energy
Saving
j q (See p. 77)
16. Auto
Configuration
j u 01
17. Equalizer j v (See p. 78)
18. Tune
Command
m a (See p. 78)
19. Programme
Skip/Add
m b 00 to 01
20. Key m c (See p. 78)
21. Control
Backlight
m g 00 to 64
22. Input select x b (See p. 79)
23. Fail Over
Mode
m i (See p. 79)
24. Fail Over
Input Select
m j (See p. 79)
• During USB operations such as DivX or EMF, all commands except
Power(ka) and Key(mc) are not executed and treated as NG.