ENGLISH
44
-
Type: Fusion
» Method: Connection direction can be selected. (Device to Fusion, Fusion to Device)
» Device to Fusion: How to connect from set to server
URL: Server URL
Port: Server Port
» Fusion to Device : How to connect from server to set
• Auto Discovery: The ability to locate other Crestron equipment in the network
• SSL: Communication security with server can be established. The following items are meaningful only at SSL on
-
User, Password: When the Authentication function is turned on on the server, User and Password must be entered to connect with the
server.
-
Verify Certificate: A feature that checks whether a certificate installed on a server is valid. If it is not valid, it does not connect to the server
-
Certificate Download: The certificate must be stored in the set to perform the Verify Certificate function. Only certificates with extensions
.pem, .crt in the USB root directory are recognized and can be added or deleted through the menu. All certificates stored at the time of
Factory Reset are deleted.
• The connection status with is displayed. (Disconnected, Connecting, Connected)
• CONNECT: If you press the button once, a set tries to connect to the server and the button phrase is changed into DISCONNECT. To disconnect, pressing the
button again is needed.
Welcome Video Mode
(Depending on model)
• You can set to Off, Once or Repeat.
Operation
• The video displays after your TV is turned on and the boot logo appears.
• If Welcome Video is enabled and a video is downloaded on the TV, the video plays.
• The time it takes a video to be displayed may differ depending on the decoding time of the video.
• Controls for playing the video are not available. (Pause, stop, fast forward, etc.)
• Videos in any file format that the TV supports can be downloaded and displayed.
Developer Mode
(Depending on model)
• This feature provides great convenience to the app developers.
• Set up to install the Developer mode app.
To Next Page
Loading...
