Programmes
Automatically Setting Up Programme
General Programmes Programme Tuning Auto Tuning
Automatically tunes the programmes.
If Input Source is not connected properly, programme registration may not work.
Auto Tuning only finds programmes that are currently broadcasting.
If Safety is turned on, a pop-up window will appear asking for password.
To Use Manual Programme Tuning
General Programmes Programme Tuning (Programme Tuning &
Settings) Manual Tuning
This function is for manually searching and saving programmes.
For digital broadcasting, signal strength and signal quality can be checked.
To Use the Signal Test
General Programmes Programme Tuning (Programme Tuning &
Settings) Signal Test
Shows the MUX and Service information etc.
Signal test is only available in Antenna or Cable mode.
Some models may not be supported.
Edit Programmes
You can edit the selected programmes from all the stored programmes or add/delete
them to/from the favourite programmes.
Edit All Programmes List
Select Country where the TV is used. Programme settings change depending on the
country you choose.
01
Initiate Auto Tuning.02
Set Auto Tuning following screen instructions.03
To Next Page
Loading...
