LG UT66 Series - Pro:centric; Mode; Update Event; Room Number Setting

ENGLISH
26
Pro:Centric
(Depending on model)
Mode
• Sets whether or not enable Pro:Centric and the service method.
• You can set to O, Conguration Only, GEM or HTML. The default value is O. (‘Mode’ items is dier depending on model)
Update Event
• When Update Event is set to ‘Enable’, Hour and Minute items are enabled and then the Update Event function is enabled.
• When Update Event is set to ‘Disable’, ‘Hour’ and ‘Minute’ items are disabled and then the Update Event function is disabled.
Room Number Setting
• You can set Label and Room Number using the Room Number Setting.
Media Type
(Depending on model)
• Sets the media type to RF or IP.
• The default value is RF.
RF
(Depending on model)
• Data Channel
-
Sets the Channel at which the Pro:Centric data is received.