PIPE CONNECTIONS BETWEEN INDOOR AND OUTDOOR UNIT
19
ENGLISH
Remove leakage prevention cap
• Remove the leakage prevention cap attached to the outdoor unit service valve before pipe
work.
• Proceed the leakage prevention cap removal as follows:
- Verify whether the liquid/gas pipes are locked.
- Extract remaining refrigerant or air inside using the service port.
- Remove the leakage prevention cap
Service Port
Leakage Prevention Cap
Liquid pipe
Gas pipe
Pipe Drawing Out
Method of drawing out pipes on the front side and right side
- Proceed with the pipe work as shown in the below figure for front side and right side pipe draw-
ing out.
Pipe Knock Out for
Liquid/Gas pipes
※Pictures may differ depending on the model.
1,MFL68645301(영) 2017. 6. 16. 영영 1:43 Page 19
To Next Page
Loading...
