27
EN
Using the Low Heating Function
This function operates the heating system to
maintain a minimum room temperature and
prevent objects in the room from freezing where
there is no permanent resident, such as a
vacation.
x
, are displayed on the display screen.
NOTE
x This function is available with Heating Mode.
x During LH operation, when you press buttons
such as
, , MODE, FAN SPEED, and
then return to Heating Mode.
x If JET MODE button is pressed during LH
operation, this function is disabled and Power
Heating Mode is operated immediately. (only
for power heating model)
x In case an error occurred, operation can be
interrupted for the protection of the product.
x COMFORT AIR and
SWING
button cannot be
used while the LH function is in operation.
Using the Mosquito Away
Function
This function fans away mosquitos by
generating a high-frequency wave.
x
is displayed on the display screen.
NOTE
x You can use this function without turning the
air conditioner on.
x is displayed on some indoor units.
Using the Auto Clean Function
In the Cooling and Dehumidification Mode,
moisture is generated inside the indoor unit.
This function removes such moisture.
x
is displayed on the display screen.
NOTE
x Some functions cannot be used while the Auto
Clean function is in operation.
x If you turn off the unit, the fan continues to run
for 30 minutes and cleans the inside of the
indoor unit.