13
HOW TO INSTALL THE HOME STATION
1. Position the home station against a wall, to prevent sliding dur-
ing docking, on hard level flooring.
Remove objects within 1m. to the right and left side and within
2m. to the front.
2. Plug the power cord into an outlet.
Wrap the power cord around the fixed hanger on the back side
of the home station or along the wall surface so that the travel
path of the HOM-BOT will not be obstructed.
3. Fix the home station against the wall so that it does not move.
How to Install the Home Station
• Always keep the home station plugged in. If the home station is not plugged in, the HOM-
BOT will not return to the station to charge automatically.
• Do not operate the Home Station if it has a damaged cord or plug, if it is not working prop-
erly, or if it has been damaged or dropped. To avoid any electrical hazard, the cord must be
replaced by LG Electronics, or a qualified service person.
Fixing groove of power cord
Tip
ENGLISH
To Next Page
Loading...
Need help?
General
