LG VX122H4 NJMO - Preparation before Operation

12
OPERATION
Preparation before
Operation
Inserting the Batteries into the
Wireless Remote Control
Insert AAA (1.5 V) batteries into the wireless remote
control.
• Remove the battery cover, then insert the new
batteries and make sure that the + and –
terminals of the batteries are installed correctly.
NOTE
• When the wireless remote control display begins
to fade, replace AAA (1.5 V) batteries.
• Do not use old and new batteries together.
Setting the Current Time on the
Wireless Remote Control
1 Insert batteries.
• The icon below flashes at the bottom of the
display screen.
2 Press the f or e button to set the correct
time.
3 Press the SET/CANCEL button to stop the
flashing.
NOTE
• The On Timer and Off Timer is available after
setting the current time.
• If you have already inserted the battery, reinsert
it or use the
RESET button to set the current
time.
Selecting Fahrenheit or Celsius
(On Some Models)
Set the temperature display to show either
Fahrenheit (
8 ) or Celsius ( 7 ) units.
1 Turn the appliance on.