LG VX122H4 NJMO - Page 18

18
OPERATION
3 Press the a or b button to select the desired
operation code if the temperature is higher or
lower than the desired temperature.
NOTE
• You cannot adjust the fan speed, but you can set
the air deflector to rotate automatically.
Auto Changeover Mode
[Cooling and Heating Model]
The appliance will automatically set the operation
mode to
Cooling or Heating depending on the
room temperature. You can set the desired
temperature and fan speed. The temperature is
maintained the desired temperature within ±2
7 .
1 Turn the appliance on.
2 Press the MODE button repeatedly to select
Auto Changeover mode.
3 Press the a or b button to set the desired
temperature.
4 Press the FAN SPEED button to adjust the fan
speed.
Dehumidification Mode
You can reduce excess moisture from a highly
humid environment or during the rainy season, in
order to prevent mildew from setting in. The
appliance will automatically change the
temperature and the fan speed to maintain the
optimal level of humidity.
1 Turn the appliance on.
Code Description
2
The appliance sets the desired
temperature to a level higher than
the current temperature.
1
The appliance sets the desired
temperature to a level slightly
higher than the current
temperature.
0
The appliance maintains the
current temperature.
-1
The appliance sets the desired
temperature to a level slightly
lower than the current
temperature.
-2
The appliance sets the desired
temperature to a level lower than
the current temperature.