LG VX122H4 NJMO - Page 20

20
OPERATION
3 Press the FAN SPEED button to adjust the fan
speed.
NOTE
• ON or t is displayed on some indoor units.
Jet Mode
You can change the room temperature quickly.
•
Cooling Only model
The Jet mode is available with the Cooling ,
Dehumidification , Fan , Auto Operation modes
and
Air Purification function.
•
Cooling & Heating model
The Jet mode is available with the Cooling ,
Heating and Dehumidification modes.
1 Turn the appliance on.
2 Press the MODE button repeatedly to select
the desired mode.
3 Press the JET MODE button.
NOTE
• Jet Cooling Mode
The strong cool air blows out for 30 minutes.
After 30 minutes, the temperature is maintained
at 18
7 by default.
- To change the temperature, press the
a or b
button to set the desired temperature.
•
Jet Heating Mode
The strong warm air blows out for 30 minutes.
After 30 minutes, the temperature is maintained
at 30
7 by default.
- To change the temperature, press the
a or b
button to set the desired temperature.
- The
Jet Heating mode is not available on
some models.
•
Jet mode may operate differently from the
wireless remote control display.
Adjusting the Airflow Direction
You can adjust the direction of the airflow vertically
or horizontally.
Adjusting the Up-Down Direction
• Press the UP-DOWN SWING button repeatedly
to adjust airflow direction.
WYNO
WYNO