USING BLUETOOTH
®
The VX8300 is compatible with devices that support the Bluetooth
®
headset (HSP), hands-free (HFP),
serial port (SPP), dial-up networking (DUN), and object push (OPP) profile(s) for vCard.* You may
create and store 20 pairings within the VX8300 and connect to one device at a time. The approximate
communication range for Bluetooth
®
wireless technology is up to 30 feet (10 meters).
Note: Read the user guide of each Bluetooth
®
accessory that you are trying to pair with your phone because the
instructions may be different.
Note: Phone does not support ALL Bluetooth
®
OBEX Profiles.
* For vehicle/accessory compatibility go to www.verizonwireless.com/bluetoothchart.
Pairing the Device
1. Follow the Bluetooth
®
accessory instructions to set the device to pairing mode.
2. Press [MENU], 2 times, , or . Set the desired device to pairing.
3. If Bluetooth
®
power is set to off, you will be prompted to turn power on. Select Yes and press
.
4. The device will appear in the found devices list menu once it has been located. Highlight the
device and press .
5. The handset will prompt you for the passcode. Consult the Bluetooth
®
accessory instructions for the
appropriate passcode (typically “0000” - 4 zeroes). Enter the passcode and press .
6. Once pairing is successful, select Yes and press to connect with the device.
40
To Next Page
Loading...
Need help?
General
