VX8700 17
Battery Temperature Protection
If the battery gets overheated, the phone will
automatically turn off. When you turn the phone
back on, a message pops up alerting you that the
phone was powered off for your safety.
Battery Charge Level
You can find the battery charge level at the top
right of the LCD screen. When the charge level
becomes low, the battery sensor sounds a warning
tone, blinks the battery icon, and displays a
warning message. As the charge level approaches
empty, the phone automatically switches off
without saving.
Signal Strength
Call quality depends on the signal strength in your
area. You can tell how much signal strength you
have by the number of bars next to the signal
strength icon: the more bars, the stronger the
signal. If you’re having problems with signal quality,
move to an open area or, when inside a building,
try moving near a window.
Turning the Phone On and Off
Turning the Phone On
1. Install a charged battery or connect the phone
to an external power source.
2. Press until the LCD screen lights up.
Turning the Phone Off
1. Press and hold until the display turns off.
Making Calls
1. Make sure the phone is turned on.
If not, press for about three seconds.
If necessary, enter the lock code.
2. Enter the phone number.
3. Press .
4. Press to end the call.
EmptyFully Charged
To Next Page
Loading...
