27
Adding a Pause to a Contact Entry
1. Press Right Soft Key [Contacts].
2. Use to select a Contact entry, then press
[Edit].
3. Use to select the number, then press Right
Soft Key [Options].
4. Press Add Pause.
5. Press Wait or Pause.
6. Enter additional number(s), then press .
Changing the Default Number
The Default Number is the phone number you
entered when you created the Contact. Another
number can be saved as the Default Number.
1. Highlight a contact, press Left Soft Key [Edit].
2. Use to highlight the phone number you want
to be the Default Number, then press Right Soft
Key [Options].
3. Use to highlight Set As Default, then press
.
4. Press to set the new number as the default.
A confirmation message is displayed.
5. Press again to save.
To Next Page
Loading...
